The sludge scraper is a continuous removal of the solid suspended solids floating on the surface of the water and the bottom of the sludge, along the tank surface and the bottom of the tank, and the suspension from the inlet side of the liquid To the exit end. Scraper scraper blade is fixed at both ends of the chain chain scraper scraper works, scraping scraper is driven by the sprocket drive to drive. The scraper scraper moves along the entire width of the slot, Sludge Scraping and Sucking Machine scraping the contaminants into the slag tank and scraping the sludge into the sludge bucket.
Sludge scraper is widely used in advection sedimentation tank sludge scraping, suction. The sludge scraper is compact, reliable and equipped with automatic control and overload protection system. Track spacing 4 meters below the sludge scraper using the middle of the centralized drive. Spacing more than 6 meters when using both ends of the synchronous drive.
ZXG series of central transmission sludge scraper
Applicable to the center without a pier of the radial or vertical flow sedimentation tank (φ <15m) of the mechanical sludge. The machine has a fixed platform across the pool, Sludge Scraping and Sucking Machine the work of the whole load are acting in the center of the work bridge, the sewage flow through the pool center tube evenly around the pool. With the decrease of the flow rate, the suspended matter in the sewage is precipitated in the bottom of the pool, and the bottom scraper draws the sludge into the center pit and discharges it from the sludge pipe by the hydrostatic pressure.
Sludge scraper features:
1, scraper with logarithmic spiral curve form, and the use of rubber tire support along the bottom of the walk, scraper effect is good, the requirements of the bottom of the lower, Sludge Scraping and Sucking Machine good adaptability;
2, in addition to the main scraper device, but also installed a unique auxiliary scraper device, so that half-bridge scraper function can play a full bridge scraper effect;
3, the work bridge with truss structure, the bridge laying steel grating, high strength, light weight, energy consumption;
4, driven walking wheel for the solid rubber wheel, no track, simple structure, easy installation;
5, underwater parts are made of stainless steel, Sludge Scraping and Sucking Machine water parts with carbon steel and hot dip galvanized, good corrosion resistance, long service life.
- Flotation Machine
- Air Flotation Machine Use
- Cavitation Air Flotation Machine
- Ultra Efficiency Shallow Air Flotat...
- Application Of Cavitation Air Flota...
- Dissolved Air Flotation Machine Use
- Introduction To Scraper
- Use Of Scraper
- Scraper Works
- Characteristics Of Sludge Scraper
- The Importance Of Conveyor Belt Mai...
- Air Flotation Is Widely Used
- The Sludge Scraper Is Often Maintained
- Conveyor Belt Is Widely Used In Met...
- Sorting Method Of Air Flotation
- Anti-corrosive Property Of Sludge S...
- How To Use Medium Sized Filters
- Application Of Sludge Scraping And ...
- Conveyor Belts Adopt Fast Chain Tra...
- Two Functions Of Three-phase Separator