WOMA(wuxi) environmental protection equipment Co.,Ltd

High quality product, professional service, being the core supplier in air floatation and sewage treatment equipment!

Home > News > Content
Application Of Sludge Scraping And Suction Machine In Sewage Treatment Plant
- Jul 24, 2017 -


Sludge scraping machine is the floating on the water surface of the solid suspension and the sludge at the bottom of the pond continuously removed, scraping mud scraper along the pool surface and the bottom of the pool movement, and suspended from the liquid side of the inlet to the export end. Wiper scraper Scraper is fixed in the chain of the two ends of the chain plate scraper scraping mud machine working principle, Sludge Scraping and Sucking Machine scraping mud scraper is driven by driving sprocket drive device to drive. The scraping mud scraper moves along the entire width of the groove, scraping the contaminants into the slag chute and scraping the sludge into the sludge bucket.

Sludge scraping and suction machine is widely used in flat-flow sedimentation tank sludge scraping, suction. The sludge scraper is compact in structure, reliable in work and equipped with automatic control and overload protection system. The track spacing is 4 meters below the sludge scraping suction machine uses the intermediate centralism drive. Sludge Scraping and Sucking Machine The two-sided synchronous drive is used when the spacing is more than 6 meters.

Characteristics of sludge scraping and suction machine:

1. The scraper adopts logarithmic spiral curve form, and adopts the rubber wheel support to walk along the bottom of the pool, the effect of scraping mud is good, Sludge Scraping and Sucking Machine the requirement of the bottom is lower and the adaptability is good;

2, in addition to the main scraping mud device, but also installed a unique auxiliary scraping device, so that the half bridge scraping mud function of the whole bridge scraping machine effect;

3, the work Bridge uses the truss structure, Sludge Scraping and Sucking Machine the bridge deck lays the steel grating, the intensity is high, the weight is light, the energy consumption province;

4, driving wheel for solid rubber wheel, no track, simple structure, easy installation;

5, the underwater components are stainless steel materials, water components using carbon steel and hot dip galvanized, good corrosion resistance, long service life.

Scraping mud operation should pay attention to the change of sewage volume and pollution degree, sludge discharge pipeline work, mud scraper suction machine, such as failure in time to eliminate. If you need to stop and discharge, sludge scraping and suction machine, should stop to Chine discharged into the sewage, Sludge Scraping and Sucking Machine after the failure of the discharge of sewage, and then drive.

Sludge scraping machine is a dumping equipment, mainly can be used in sewage treatment plant, can effectively achieve the effect of sewage treatment, for the installation of sludge scraper, Sludge Scraping and Sucking Machine should abide by what kind of rules, the following gives you a brief introduction of this content.

Installation guidance of sludge scraping and suction machine

Sludge scraping and suction machine sedimentation at the bottom of the pool and the removal of the pond surface scum and other links. Whether the correct installation is related to the quality of sludge discharge. Sludge scraping and suction machine operation using static pressure self-priming and siphon cooperation to discharge mud, in the specific operation process, through the rotation of the scraping arm, Sludge Scraping and Sucking Machine the sludge is guided by the scraper to the mud pipe mouth by using the water level difference between the final settling tank and the mud trough to form a static pressure self-priming, while the side turns the suction, the sludge in the suction is set in the mud trough, the water level difference between the mud trough and the central mud trough is then sucked from the siphon to the central mud trough, and finally the sludge discharged from the central mud trough is discharged to the mud collecting well for the sludge return or discharge of the pumping station. Sludge scraper is mainly composed of truss, scraper and suction pipe, center vertical frame, flow regulating device and other four parts.

Sludge scraping machine products in the specific installation process need to pay attention to the following: 1, according to the size of the equipment for civil construction, civil error can not exceed the allowable range. 2, Sludge Scraping and Sucking Machine the center vertical frame and the circular mud trough are placed in the center column according to the next order and the two are connected with the corresponding bolts, otherwise the drive device will not be in place.

The above-mentioned content is about the sludge scraping machine in the installation process, can pay attention to some of the details, can see that the principle of the sludge scraping machine is the use of static pressure self-priming and siphon cooperation, so as to achieve the effect of sludge, so in the installation, Machine should also be installed according to these.