WOMA(wuxi) environmental protection equipment Co.,Ltd

High quality product, professional service, being the core supplier in air floatation and sewage treatment equipment!

Home > Exhibition > Content
Main structure of stainless steel shaftless screw conveyor
- Mar 20, 2018 -

The stainless steel shaftless screw conveyor has a large conveying capacity during the operation. This series of hoists is the hoister with the largest conveying capacity in the similar structure in the domestic similar hoists. The stainless steel shaftless screw conveyor has a wide range of lifting. Such type of equipment will effectively have less requirements on the types and characteristics of materials, not only can improve the general powder, small particles, but also can improve the material with greater abrasiveness, requiring temperature ≤ 200 °C.

Stainless steel shaftless screw conveyors have low power input into the drive. In the process of operation, inflow feeding is used to induce unloading to a certain extent. The equipment is a large-capacity hopper-intensive arrangement in its material. There is almost no return and excavation at the time of lifting, thus reducing the reactive power and saving 30% of the power compared with the chain hoist.

The stainless steel shaftless screw conveyor has a high lifting height, the entire equipment will effectively use its plate-chain high-strength chain, and the lifting height can reach 60 meters under the rated delivery volume. The operation and maintenance of the entire equipment is very convenient and fragile. Less.

Main structure of stainless steel shaftless screw conveyor

1. Running parts: It is composed of a hopper and a sleeve roller chain.

2, the drive device (left, right assembly): from the drive platform, drive combination (reducer, motor, hydraulic coupling device), the drive chain.

3, the upper device: upper housing, upper cover, discharge port, on the shaft device, backstop.

4. Middle casing: standard section (2m) and non-standard section (1~1.5m), including middle section with inspection door; 5. Lower part: lower part, feeding port, tail shaft device, tensioning device .

http://www.air-floatation.com/